Category: Petroleum Production Systems
-
Approximation of Gas Well Deliverability
The steady-state relationship developed from Darcy’s law for an incompressible fluid (oil) was presented as Equation. A similar relationship can be derived for a natural gas well by converting the flow rate from STB/d to MSCF/d and using the real gas law to describe the PVT behavior of the gas. Beginning with the differential form…
-
Gas Formation Volume Factor
The formation volume factor relates the reservoir volume to the volume at standard conditions of any hydrocarbon mixture. In the case of a natural gas, the formation volume factor, Bg, can be related with the application of the real gas law for reservoir conditions and for standard conditions. Thus, For the same mass, nR can be cancelled out…
-
Gas Compressibility Factor Correction for Nonhydrocarbon Gases
Wichert and Aziz (1972) have presented a correlation that allows the use of the Standing-Katz graph (Figure 4-1) in the presence of nonhydrocarbon gases. In this case corrected pseudocritical values are and where the term ε3 is a function of the H2S and CO2 concentrations given by that can also be obtained graphically from Figure 4-3. Figure 4-3. Pseudocritical…
-
Pseudocritical Properties from Gas Gravity
In the absence of detailed composition of a natural gas, Figure 4-2 can be used to relate the gas gravity (to air) with the pseudocritical properties of gas mixtures. Using the results of Example 4-2, the calculated molecular weight is 18.92, leading to γg = 18.92/28.97 = 0.65. From Figure 4-2, ppc = 670 psi and Tpc = 375°R, which compare with 671 psi and…
-
Correlations and Useful Calculations for Natural Gases
Several important works have presented correlations for natural gas properties. Following is a summary of these, with brief descriptions of the use of these correlations.
-
Real Gas Law
The behavior of natural gas mixtures can be approximated by the real gas law where Z is the compressibility factor, also called the gas deviation factor in the petroleum engineering literature. The universal gas constant, R, is equal to 10.73 psi ft3/lb-mol-°R. Equation (4-2) is a general equation of state for gases. The gas compressibility factor for mixtures of…
-
Gas Gravity
Gas gravity, as used in natural gas production and reservoir engineering, is the ratio of the molecular weight of a natural gas mixture to that of air, itself a mixture of gases. Gas gravity is perhaps the most important defining property of a natural gas because almost all properties and, in fact, the actual description…
-
Introduction
Natural gas reservoirs produce hydrocarbons that exist primarily in the gaseous phase at reservoir conditions. To predict the gas production rate from these reservoirs, there is a need to review some of the fundamental properties of hydrocarbon gases. This is particularly important (more so than in the case of oil reservoirs) because certain physical properties…
-
Fetkovich’s Approximation
Vogel’s correlation, normalizing qo by qo,max, is frequently not in close accordance with field data. Fetkovich (1973) suggested a normalization with , and in a flow equation of the form the relationship becomes Equation (3-63) requires the determination of two unknowns, the absolute open flow potential, qo,max, and the exponent n. Both of them are characteristic of a specific well and…
-
Generalized Vogel Inflow Performance
If the reservoir pressure is above the bubble point and yet the flowing bottomhole pressure is below, a generalized inflow performance can be written. The following approach enables generation of an IPR that has a straight portion for pwf ≥ pb, and follows the Vogel equation for pwf < pb adapted to the straightforward logic found in Standing (1971). This can be…