Category: Basic Industrial Engineering
-
Air Toxics: Toxic Air Pollutants
Title III of the amendments deal with air toxics. Toxic air pollutants (TAPs) or air toxics, and also known as hazardous air pollutants (HAPs) are airborne pollutants that are known to have adverse human health effects, such as cancer. Currently, there are about 189 chemicals identified on the CAA list of HAPs or TAPs (Table…
-
Air Pollution Perspective
Air pollution is woven throughout the fabric of our modern life. A by‐product of the manner in which we build our cities, air pollution is waste remaining from ways we produce our goods, transport ourselves, and generate the energy to heat and light the cities where we live, work, and play. The major cause of…
-
Example NPDES Permits (for Refinery and Aluminum Smelter are shown in Section D.1)
Total Maximum Daily Load (TMDL) Rule Under the CWA, the states in the United States are required to identify surface waters that do not meet specified water‐quality standards or do not meet the designated beneficial uses (USEPA 1991a). In the 1990s, a significant percentage of the nation’s waters were found to be impaired based on quality…
-
NPDES Wastewater Discharge Permits for Point Sources
The NPDES permits program is authorized by the CWA (CWA Section 402, 33 U.S. C. 1342). The initial permits issued in the 1970s and early 1980s focused on POTWs and industrial wastewater – typically “process” wastewater and cooling water where applicable. An NPDES Permit is required for a discharge of wastewater to waters of the United States…
-
Water Quality Modeling
Water quality modeling involves the prediction of water pollution using mathematical simulation techniques. A typical water quality model consists of a collection of formulations representing physical mechanisms that determine position and momentum of pollutants in a water body. Models are available for individual components of the hydrological system such as surface runoff; there also exist…
-
Streeter–Phelps Equation and DO Sag Curve in a River
The Streeter–Phelps equation determined the relation between the dissolved oxygen concentration and the biological oxygen demand over time (Streeter and Phelps 1925). The concentration of DO in a river is an indicator of general health of the river. All rivers have some capacity for self‐purification. As long as the discharge of oxygen demanding wastes is well…
-
Electromagnetic Flow Meter
Electromagnetic flow meter operation is based on the fact that the voltage induced by a conductor moving at right angles through a magnetic field will be proportional to the velocity of that conductor as it moves through the field. In the case of the electromagnetic flow meter, the conductor is the stream of water to…
-
Secondary Devices
Secondary devices are used in conjunction with primary devices to determine the actual flow passing the measuring point. Typically, secondary devices measure the depth of water in the primary device and convert the depth measurement to a corresponding flow, using established mathematical formulas. The output of the secondary device is generally transmitted to a recorder…
-
Flow Measurements
Pollutant limits in the industrial user’s permit are often expressed in terms of mass loadings to an industrial facility or a POTW (e.g. categorical standards for conventional pollutants, organics, metals, microorganisms, etc.). To determine a mass loading, it is necessary to obtain and record accurate flow data. This section briefly describes the types of devices…
-
Application of Toxicity Test Results
Water quality criteria ensure protection of designated uses by including magnitude (quantity of toxicant allowable), duration (period of time over which instream concentration is averaged), and frequency (how often criteria can be exceeded without unacceptable receiving water ecological community impacts). Contemporary water quality criteria are designed to protect against short‐term (acute) effects through use of…