Category: Mechanical And Durability Testing Of Aerospace Materials
-
Flexure test
The flexure test measures the mechanical properties of materials when subjected to bending load. A flat rectangular specimen is loaded at three or four points, as shown in Fig. 5.14. The load causes the specimen to flex, thus inducing a compressive strain on the concave side, tensile strain on the convex side, and shear along the mid-plane.…
-
Compression test
The compression test determines the mechanical properties of materials under crushing loads. There are many aircraft structures that carry compression loads, such as the undercarriage during take-off and landing or the upper wing surface during flight, and therefore the mechanical behaviour of their materials must be determined by compression testing. It is often assumed that…
-
Tension test
Basics of the tension test The tension test is one of the most common and important methods for measuring the mechanical properties of materials. The tension test is popular because a large number of properties can be determined in a single test: elastic modulus, strength, ductility, and other properties. The test is also popular because it…
-
Introduction
The selection of materials for aircraft structures and engines is assessed according to a multitude of parameters such as cost, ease of manufacture, weight and a host of other factors. Central to the selection of materials is their mechanical properties such as stiffness, strength, fatigue resistance and creep performance. The durability properties of structural and…