Category: Advance Concepts For Building Construction Materials

  • Types of Timber Sloping Roofs

    Different types of timber sloping roofs are discussed below. 1. Lean to Roof This is a roof which is usually used to cover verandah. This is used for spans up to 2.5 m. The roof covering is fixed to battens running across the rafters. It is usually constructed as a mono-pitched roof (Fig. 25.2). Figure…

  • Terminologies

    Following are the terminologies which are relevant to sloping roofs (Fig. 25.1). Figure 25.1 Parts of a sloping roof 1. Span Clear span is the horizontal distance between the walls or the supports. Effective span is the horizontal distance between the centres of bearings of the supports. 2. Pitch Pitch is the slope of a roof…

  • SLOPING ROOFS

    Sloping roofs are comparatively light in weight and can be used in large to very large spans. They are quite suitable in areas where there are heavy rain and snow. Shapes of sloping roofs are dependent on the area to be covered, material used, light, ventilation needed, etc.

  • TYPES OF ROOFS

    Roofs may be grouped under two major categories, viz., sloping or pitched roofs and flat roofs. Slope or pitched roofs are those which have the surfaces with considerable slope for covering the building structure. The modern construction like shells may also be grouped under this category. A roof which is nearly flat is known as…

  • REQUIREMENTS OF A ROOF

    A roof is provided to satisfy the following basic requirements:

  • INTRODUCTION

    Roof is the upper most part of a building which is constructed on structural members and provided with a covering material. The sole aim of roof is to enclose the space securely and protect the building and the occupants from atmospheric effects like sun, wind, rain, snow, etc. A roof is as important as that…

  • Hollow Block and Rib Floors

    In this type of floors, to reduce the total weight of the floor hollow blocks of clay or concrete are used. In one type, the blocks are placed at 10 cm apart and in this space, mild steel bars are placed (Fig. 23.11). Suitable flooring at top and ceiling finish are provided. In order to…

  • Resilient Floors

    Floors made from materials such as PVC, linoleum, rubber, etc., are called resilient floors. Resilient floors are sound proof and dust free and are used in libraries, offices, computer rooms, show room, etc. The three important resilient floors are: (i) PVC (Vinyl floors), Linoleum floor and Rubber floor, which are briefed below. 1. PVC Floor…

  • Flat Slab Floors

    This type of floor is called as beamless slab floor. This flat slab floor is directly supported on columns without any intermediate beams. This type of floor is preferred where heavy loads are anticipated and where there is head room restriction. The columns supporting the floor are invariably circular in cross-section and tops of the…

  • RCC T-Beam Slab Floors

    In this type of floor, beams and slabs are designed as rectangular sections and the slabs are supported on beams. It is a monolithic construction both the beams and slabs are cast together. The beam used in monolithic construction is called a T-beam (i.e., a part of slab acts as a flange of the T-beam).…