Author: haroonkhan

Pyramid approach to aircraft certification The certification of structural and engine materials is one of the most important issues with the testing and evaluation of new aircraft. Certification is also performed when new materials are used in major structural refits of existing aircraft, usually for life extension. Certification is essential to ensure the materials are…

Corrosion testing of metals One of the most damaging environmental effects of aerospace metals is corrosion. Corrosion of the metal alloys used in aircraft structures and engines occurs in many forms, including general corrosion, stress corrosion, pitting corrosion, crevice corrosion and exfoliation corrosion. The describes the corrosion properties of metals. There is no single, universal corrosion test; instead…

Creep is a plastic deformation process that occurs when materials are subjected to elastic loading for a long period of time, often at high temperature. Engineering materials do not plastically deform when loaded within the elastic regime for short times. However, when the elastic load is applied for a sufficient period the material eventually deforms…

Fatigue tests measure the resistance of materials to damage, strength loss and failure under the repeated application of load. Aerospace materials must withstand repeated loading for long periods of time, which is in the order of 15 000–20 000 flight hours for modern jet engine materials and anywhere from 80 000 to 120 000 h for…

Fibre–polymer composites are susceptible to damage from impact events such as bird strike, dropped tools during aircraft maintenance, tarmac debris kicked-up by the wheels during take-off or landing, and large hail stones. Impact testing is performed at different impact energy levels to screen composite materials for damage resistance and damage tolerance. The most common and…

Fracture toughness is an engineering property that defines the resistance of a material against cracking. Tough materials require large amounts of energy to crack whereas low toughness materials have little resistance against cracking. For the materials used in aircraft structures, fracture toughness is just as important as other mechanical properties such as elastic modulus and…